81
9
AIS RECEIVER (Depending on versions)
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
ID BLOCKING
The transceiver blocks AIS transponders that are entered
into the ID blocking list. Enter your vessel’s transponder ID,
or other vessel’s transponder IDs if necessary to prevent the
transceiver from detecting them as dangerous targets.
You can enter a maximum of 10 transponder IDs.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] or [CLEAR] to return to the previous screen.
e
Select [FINISH], and then push [ENT] or Dial to enter it.
• Returns to the “ID BLOCKING” menu.
• Editing an ID
q
Select the “ID BLOCKING” menu.
w
Rotate Dial or push [
∫
]/[
√
] to select an ID, and then push
[EDIT].
• Select a number using [
∫
]/[
√
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, rotate Dial or select either arrow, “
←
” or
“
→
,” and then push [ENT] or Dial.
• Push [CLEAR] to cancel and return to the previous screen.
e
Select [FINISH], and then push [ENT] or Dial to set it.
• Returns to the “ID BLOCKING” menu.
• Deleting an ID
q
Select the “ID BLOCKING” menu.
w
Rotate Dial or push [
∫
]/[
√
] to select an ID, and then push
[DEL].
• “ARE YOU SURE?” is displayed.
e
Push [OK] to delete the ID and return to the “ID BLOCK-
ING” menu.
• Push [CANCEL] to cancel it.
• Entering an ID
q
Select the “ID BLOCKING” in
the AIS SETTINGS menu.
• The blocked AIS transponder’s
ID is displayed.
• “No ID” is displayed if there are
no blocked AIS transponders.
w
Push [ADD] to start the ID
entry.
• Select a number using [
∫
]/[
√
]/
[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, rotate Dial
or select either arrow, “
←
” or
“
→
,” and then push [ENT] or Dial.
Содержание IC-M506GE
Страница 1: ...INSTRUCTION MANUAL iM506GE VHF MARINE TRANSCEIVERS iM506...
Страница 116: ......