![background image](http://html.mh-extra.com/html/icom/ic-m504a/ic-m504a_instruction-manual_612822059.webp)
53
8
SET MODE
■
Set mode programming
Set mode is used to change the settings of the transceiver’s
functions: Scan type, Scan resume timer, Weather alert, Dual/
Tri-watch, Beep tone, LCD contrast, Automatic foghorn fre-
quency, Radio power*
1
, Scrambler type*
2
, Scrambler code*
2
and Remote ID.
*
1
Appears only when the optional Command microphone is connected.
*
2
Appears only when the optional scrambler unit is installed.
Selectable functions may differ depending on dealer setting.
q
Turn the power OFF, and while holding down
[16•9], push
[POWER] to enter the Set mode.
w
After the display appears, release
[16•9].
e
Rotate
[DIAL] to select the desired item, then push
[DIAL•ENTER].
r
Rotate
[DIAL] to select the desired setting of the item, then
push
[DIAL•ENTER].
t
Push
[CLR], or rotate [DIAL] to select “
Exit
,” then push
[DIAL•ENTER] to exit the Set mode.
Rotate
--Set Mode--
˘Scan Type
Scan Timer
WX Alert
Dual/Tri
Beep
Contrast
Foghorn Frequency
Radio Power
Scrambler Type
Scrambler Code
Remote ID
Exit
• SET MODE CONSTRUCTION
■
Set mode items
D
Scan type
The transceiver has two scan types: Normal scan and Priority
scan. Normal scan searches all TAG channels in the selected
channel group. Priority scan sequentially searches all TAG
channels while monitoring Channel 16.
--Set Mode--
Scan Type
Priority
˘Normal
(Default: Normal)
D
Scan resume timer
The scan resume timer can be selected as a pause (OFF)
or timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 seconds and resumes, even if a signal has been
received on any channel other than Channel 16.
--Set Mode--
Scan Timer
ON
˘OFF
(Default: OFF)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Содержание IC-M504A
Страница 1: ...INSTRUCTION MANUAL iM504A VHF MARINE TRANSCEIVER ...
Страница 78: ......