16
4
BASIC OPERATION
■
Entering a Call channel data
You can enter data in Call channel in each channel group for
quick recall.
q
Select the desired channel group (INT, USA, CAN, ATIS,
or DSC) to be entered. (p. 12)
w
Hold down [16/C] for 1 second to select the Call channel of
the selected channel group.
• “CALL” and the Call channel number is displayed.
e
Hold down [16/C] again for 3 seconds (until a long beep
changes to 2 short beeps) to enter the Call channel entry
mode.
r
Rotate Dial or push [
∫
]/[
√
] to select a channel.
t
Push [ENT] to save the displayed channel as the Call
channel.
• Push [CLEAR] to cancel.
■
Entering a Channel name
Enter a name of up to 10 characters.
Capital letters, 0 to 9, some symbols, (! " # $ % & ' ( ) * + ,
–
.
/ [ \ ] ^ _ : ; < = > ?) and a space can be entered.
q
Push [
∫
]/[
√
](CH) to select a channel.
• First, cancel the Dualwatch, Tri-watch or Scan function, if acti-
vated.
w
Push [NAME] to open the channel name enter screen.
• A cursor is displayed on the first character.
e
Enter the desired channel name in the following manner:
• Select a desired character using Dial, or [
∫
]/[
√
]/[
Ω
]/[
≈
].
• Push [ENT] or Dial to set it.
• To move the cursor, select either arrow, “
←
” or “
→
,” then push
[ENT] or Dial.
• Push [123], [!$?], or [ABC] to select a character group.
• Select “SPACE,” then push [ENT] to enter a space.
• Select “DELETE,” then push [ENT] to delete a character.
• Push [CLEAR] to cancel and return to the previous screen.
