background image

20

6

DSC OPERATION

New2001

Position and time programming

A distress call should include the ship’s position and time
data. If no GPS is connected, your position and UTC (Univer-
sal Time Coordinated) time should be input manually. They
are included automatically when a GPS receiver (NMEA0183
ver. 2.0 or 3.01) is connected.

q

Push 

[MENU]

to enter the DSC menu.

w

Push 

[

]

or 

[

]

to select “

Position  Input

,” and

push 

[ENT]

.

e

The position information appears. Set your latitude data
using 

[

]

or 

[

]

. After setting the latitude data, push 

[ENT]

to set your longitude data.

• Push 

[CH•DUAL]

or 

[16•C]

to move the cursor forward or back-

ward, respectively.

• Push 

[

]

or 

[

]

to edit N; North latitude or S; South latitude

when the cursor is on the ‘N’ or ‘S’ position, and W; West longi-
tude or E; East longitude when the cursor is on the ‘W’ or ‘E’ po-
sition.

• Push 

[SCAN•TAG]

to clear the latitude/longitude data.

• Push 

[CLR]

to cancel and exit the condition to the DSC menu.

Set the latitude data

Set the longitude data

--DSC Menu--

Input Position
Longitude

___ __.___W

Null

<SCAN˘Null Data>

<CLR˘Exit / ENT˘OK>

--DSC Menu--

Input Position
Latitude

__ __.___N

Null

<SCAN˘Null Data>

<CLR˘Exit / ENT˘OK>

--DSC Menu--

Select Item
˘Position Input

Individual Call
Group Call
All Ships Call

!IC-M421-3.qxd  06.5.26 1:43 PM  Page 20 (1,1)

Содержание IC-M421

































































Отзывы: