1 - 1
SECTION 1
SPECIFICATIONS
M
GENERAL
• Frequency coverage
: TX
RX
156.025–157.425 MHz
156.050–163.275 MHz
• Type of emission
: 16K0G3E
• Antenna impedance
: 50
Ω
(Nominal)
• Operating temperature range
: –20˚C to +60˚C; –4˚F to +140˚F
• Power supply requirement
(negative ground)
: Specified Icom's battery pack
(Operating voltage; 7.5 V DC)
• Current drain (At 13.8 V DC ; approx.)
: Receiving;
Transmitting;
0.2 A (at max. audio)
1.5 A (at 5.0 W)
1.0 A (at 2.0 W)
0.7 A (at 1.0 W)
• Dimensions (Projections not included)
: 62
×
141.5
×
43 mm; 2
7
/16 (W)
×
5
9
⁄
16
(H)
×
1
11
⁄
16
(D) in.
• Weight (Approx.)
: 305 g; 10
3
⁄
4
oz. (incl. BP-252, FA-SC58V and MB-109)
M
TRANSMITTER
• Output power (At 13.8 V DC)
: 5 W (HI POWER)/2 W (AL_HI POWER)/1 W (LOW POWER)
• Modulation
: Variable reactance frequency modulation
• Maximum frequency deviation
: ±5 kHz
• Frequency stability
: ±10 ppm
• Spurious emissions
: –68 dBc typ.
• Adjacent channel power
: 70 dB
• Audio harmonic distortion
: 10% (at 60% deviation)
• Residual modulation
: 40 dB
• Audio frequency response
: +1 dB to –3 dB of 6 dB oct. from 300 Hz to 3000 Hz
• Microphone impedance
: 2 k
Ω
M
RECEIVER
• Receive system
: Double conversion superheterodyne system
• Intermediate frequencies
: 1st IF: 21.7 MHz, 2nd IF: 450 kHz
• Sensitivity
: –12 dBµ (0.25 µV) typ. at 12 dB SINAD
• Squelch sensitivity
: –9 dBµ (0.35 µV) typ. (at threshold)
• Adjacent channel selectivity
: 70 dB typ.
• Spurious response
: 70 dB typ.
• Intermodulation rejection ratio
: 70 dB typ.
• Hum and Noise
: 40 dB
• Audio frequency response
: +1 dB to –3 dB of –6 dB oct. from 300 Hz to 3000 Hz
• Audio output power
: 0.35 W typical at 10% distortion with an 8
Ω
load
• Audio output impedance
: 8
Ω
Specifications are measured in accordance with TIA/EIA-603
All stated specifications are subject to change without notice or obligation.