Icom IC-M32, Инструкция по эксплуатации

Страница: 22 / 40

16
DUALWATCH/TRI-WATCH
New2001 New2001
6
■
Description
Dualwatch monitors Channel 16 while you are receiving
another channel; tri-watch monitors Channel 16 and the call
channel while receiving another channel.
■
Operation
q
Select the desired operating channel.
w
Push [SCN
•DUAL
] for 1 sec. to start dualwatch or tri-watch
(depending on SET mode setting).
• “DUAL” blinks during dualwatch; “TRI” blinks during tri-watch.
• A beep tone sounds when a signal is received on Channel 16.
• Tri-watch becomes dualwatch when receiving a signal on the call
channel.
e
To cancel dualwatch/tri-watch, push [SCN
•DUAL
] again.
DUALWATCH/TRI-WATCH SIMULATION
• If a signal is received on Channel 16, dualwatch/tri-watch
pauses on Channel 16 until the signal disappears.
• If a signal is received on the call channel during tri-watch,
tri-watch becomes dualwatch until the signal disappears.
• To transmit on the selected channel during dualwatch/tri-
watch, push and hold [PTT].
Dualwatch Tri-watch
Call channel
[Example]: Operating tri-watch on INT channel 07.
Tri-watch starts.
Push
for 1 sec.
Signal is received
on the call channel.
Signal received on
Channel 16 takes
priority.
Tri-watch resumes
after the signal
disappears.
DUAL
IC-M32-1.qxd 03.9.25 6:21 PM Page 16 (1,1)