Icom IC-M302, Инструкция по эксплуатации

Страница: 15 / 48

9
3
BASIC OPERATION
New2001
3
■
Call channel programming
Call channel is used to select Channel 9 (default), however,
you can program the call channel with your most often-used
channels in each channel group for quick recall.
q
Push both [
Y
] and [
Z
]
on the transceiver one or
more times to select the
desired channel group
(U.S.A., International or
Canada) to be pro-
grammed.
w
Push [16•
9
] for 1 sec. to
select the call channel of
the selected channel
group.
• “ CALL ” and call channel
number appear.
e
Push [16•
9
] again for 3
sec. (until a long beep
changes to 2 short beeps)
to enter call channel pro-
gramming condition.
• Channel number starts
blinking.
r
Push [
Y
] or [
Z
] to select
the desired channel.
t
Push [16•
9
] to program
the displayed channel as
the call channel.
• Push [CH/WX
•DUAL
] to
cancel.
• The channel number stops
blinking.
!IC-M302-1.qxd 03.10.27 9:07 AM Page 9 (1,1)