Icom IC-M23 Скачать руководство пользователя страница 32

Страница: 32 / 36

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

REF.

The transceiver does not turn
ON.

• The battery is exhausted.
• The battery pack is not correctly in-

serted.

• Recharge the battery pack.
• Correctly insert the battery pack.

p. 23
p. 3

No sound from speaker.

• The squelch level is too high.
• Volume level is too low.
• Speaker has been exposed to water.

• Set the squelch level to the threshold level.
• Adjust the audio level to a suitable level.
• Remove water from the speaker grill.

p. 10
p. 10
p. 13

Transmitting is impossible,
or high power can not be se-
lected.

• Some channels are limited to low power

or only receive.

• The output power is set to low.
• The battery is exhausted.

• Change the channel.

• Push

[Hi/Lo]

to select high power.

• Recharge the battery pack.

pp. 8,
9, 27
p. 11
p. 23

The displayed channel cannot
be changed.

• The Lock function is activated.

• Hold down

[

]

(Hi/Lo) for 1 second to

turn OFF the function.

p. 13

Scan does not start

• “TAG” channels are not programmed.

• Set desired channels as “TAG” channels.

p. 15

No beep sounds.

• Beep Tone function is turned OFF.

• Turn ON the Beep Tone in the set mode. p. 18

Содержание IC-M23





































Результаты поиска

Содержание IC-M23

Отзывы:

Похожие инструкции для IC-M23

Бренды по названию

Популярные бренды

Icom IC-M23, Инструкция по эксплуатации

Результаты поиска

Содержание IC-M23

Отзывы:

Похожие инструкции для IC-M23

Бренды по названию

Популярные бренды