y
CHANNEL UP/DOWN SWITCHES [
Y
Y
]/[
Z
Z
]
➥
Push either switch to change the operating channel.
(pgs. 7–9)
➥
Checks tag channels or changes scanning direction dur-
ing scan.
(p. 13)
➥
Push either switch to change the setting during set
mode.
(p. 16)
u
CHANNEL 16 SWITCH [16•C]
➥
Selects channel 16 when pushed.
(p. 7)
➥
Selects the call channel when pushed for 1 sec.
(p. 7)
➥
Enters call channel write mode when the call channel is
selected, and this switch is pushed for 3 sec.
(p. 11)
i
INTERNAL MICROPHONE
(p. 9)
o
SPEAKER-MICROPHONE CONNECTOR [SP MIC]
Connects the optional speaker-microphone.
(p. 22)
!0
ANTENNA CONNECTOR
Connects the supplied antenna.
(p. 6)
!1
DIAL/CHANNEL GROUP SWITCH [DIAL•I/U]
➥
Selects and changes the regular channels.
(p. 8)
➥
Selects one of 2 regular channels in sequence when
pushed for 1 sec.
(p. 8)
• International and U.S.A. channels
(UK and Itarian ver-
sions only)
are available for regular channels.
!2
DUALWATCH/TRI-WATCH SWITCH [DW•TRI]
➥
Starts dualwatch when pushed momentarily.
(p. 14)
➥
Starts tri-watch when pushed for 1 sec.
(p. 14)
➥
Stops dualwatch/tri-watch when either is activated.
(p. 14)
➥
Enters comment writing condition when pushed while
pushing and holding [MONI].
(p. 15)
!3
SCAN SWITCH [SCAN•TAG]
➥
Starts and stops normal or priority scan when tag chan-
nels are programmed.
(p. 13)
➥
Sets the displayed channel as a tag
(scanned)
channel
when pushed for 1 sec.
(p. 13)
➥
While turning power ON, clears all tag channels in the
selected regular channel group when pushed.
(p. 13)
➥
Activates an optional voice scrambler function while
pushing [MONI].
(p. 10)
!4
TRANSMIT POWER/LOCK SWITCH [H/L•LOCK]
➥
Changes high and low power when pushed.
(p. 9)
• Some channels are set to low power only.
➥
While pushing [MONI], push this key to select extra low
power.
(p. 9: Not available for some versions)
➥
Changes the lock function ON and OFF when pushed
for 1 sec.
(p. 8)
!56
INTERNAL SPEAKER
PANEL DESCRIPTION
3
2
IC-M1EURO V_3.qxd 03.5.9 17:00 Page 3 (1,1)