manualshive.com logo in svg

Icom IC-iF11/S, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-iF11/S Скачать руководство пользователя страница 26

21

7

OPTION 

‘

‘

Options

D

D

BATTERY PACKS

• BP-208

BATTERY CASE

Allows a set of Alkaline batteries to operate the handheld when
charging the rechargeable battery or in emergencies, etc. 6 AA
(R6) cells are required.

• BP-209

Ni-Cd BATTERY PACK

7.2 V/1100 mAh Ni-Cd battery pack, allows more than 8 hours op-
eration.

• BP-210

Ni-MH BATTERY PACK

7.2 V/1650 mAh Ni-MH battery pack, allows approx. 11 hours op-
eration.

• BP-222

Ni-Cd BATTERY PACK

7.2 V/600 mAh Ni-Cd battery pack, allows approx. 5.5* hours op-
eration (Same as supplied with 2 W models).
*When used with 2 W model.

D

D

CHARGER

• BC-119 

DESKTOP C AD-94 (#11)

For rapid charging of battery packs. An AC adapter is supplied
with the charger. Charging time: 1.5 to 2 hrs.

• BC-121

MULTI-CHARGER

For rapid charging up to 6 battery packs simultaneously. An AC
adapter may be supplied depending on version. Six AD-94 (#11)’s
are necessary. Charging time: 1.5 to 2 hrs.

• AD-99

CHARGER ADAPTOR

• BC-144 

DESKTOP CHARGER

For rapid charging of BP-209 (Ni-Cd), BP-210 (Ni-MH) and BP-
222 (Ni-Cd).

• BC-146 

DESKTOP CHARGER

For regular charging of BP-209 (Ni-Cd), BP-210 (Ni-MH) and BP-
222 (Ni-Cd).

IC-F11_F21-1 IM  03.4.1 10:18  Page 26 (1,1)

Содержание IC-iF11/S





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды