![background image](http://html.mh-extra.com/html/icom/ic-gm1600/ic-gm1600_instruction-manual_612695017.webp)
12
5
SET MODE
5
■
SET mode items
D
Beep tone function
“bP”
You can select silent operation by turning the beep tones
OFF, or you can have 2 types of confirmation beeps sound at
the push of a key. When “ON” is selected, a fixed beep (Pi)
sounds, and when “US” is selected, the preset beeps (e.g.
do, re, mi) sound.
• Beep tone synchronizes with the volume level.
• The beeps sound during call channel programming even if this func-
tion is turned OFF.
D
Monitor switch action
“Sq”
The monitor switch action cuts off the squelch function tem-
porarily. This switch action contains PUSH (Pu) or HOLD (Ho)
settings as shown below.
• PU (PUSH): After pushing [SQL•
MONI
] for 1 sec., the squelch
opens and emits audio. The squelch is held open while
continuously pushing and holding [SQL•
MONI
]. (de-
fault)
• HO (HOLD): After pushing [SQL•
MONI
] for 1 sec., the squelch
opens and emits audio even if [SQL•
MONI
] is released.
To close the squelch, push any switch.
D
Backlighting function
“bL”
This function is convenient for nighttime operation. The back-
lighting brightness can be adjusted from OFF, 1 (dark)–3
(bright); 3 (default). Select 1–3 to turn this function ON.
• The automatic backlighting turns the backlighting ON when any
switch except for [PTT] is pushed.
• The backlighting is automatically turned OFF after 5 sec. of inactivity.
D
LCD contrast selection
“LC”
The contrast of the LCD can be adjusted from 4 levels.
• 1 (bright)–4 (dark); 3 (default)
Push
Beep tone ON (default)
Beep tone OFF
Push
PUSH setting (default)
HOLD setting
Push
Backlighting ON
(default)
Backlighting OFF
Push
Middle contrast
(default)
Low contrast