The User Set mode enables you to change various settings. You can
“customi
ze
”
the transceiver operation to suit
your preferences and operating style.
Entering the User Set mode:
Push hold 1 sec.
➥
[P0]
to enter the User Set mode.
•
While
in the User Set mode, push
[P0]
again to select an item, and then change the value or setting by pushing
[CH Up]
or
[CH Down]
.
Push hold 1 sec.
➥
[P0]
again to exit the User Set mode.
Beep:
Any sound except ringers.
Ringer:
Sounds when receiving a call.
Beep ON/OFF
ON: Beeps sound.
•
OFF: No beeps sound.
•
Beep Level
1 (minimum) – 5 (maximum)
•
•
1
(minimum) – 5
(maximum)
Linked with the audio level.
Rotate
[VOL]
to adjust the beep
audio level.
Ringer Level
1 (minimum) – 5 (maximum)
•
•
1
(minimum) – 5
(maximum)
Linked with the audio level.
Rotate
[VOL]
to adjust the
ringer audio level.
1
-
1
-
32 Kamiminami, Hirano
-
ku, Osaka 547
-
0003, Japan
© 2018 Icom Inc.
USER SET MODE
Backlight
The LCD and key backlight lights
according to this setting.
ON: Always lights.
•
AUT:
•
Lights for 5 seconds when
pushing any key except
[PTT]
.
AU2: Lights for 5 seconds every time the display
•
changes the contents.
OFF: Does not light.
•
SQL (Squelch) Level
Set the SQL level to between 0
to 9. The squelch function sup
-
presses the noise output from
a speaker when no signal is re
-
ceived.
0: SQL Open
•
2: SQL Threshold
•
9: SQL Tight
•
AF Min Level
(Minimum audio output level)
Set the audio output level when
you rotate
[VOL]
to the mini
-
mum point.
0 (minimum) – 255 (maximum)
•
Mic Gain
Higher levels make the micro
-
phone more sensitive to the
user's voice.
1 (minimum) – 4 (maximum)
•
Battery Voltage Display
ON:
•
Battery voltage is dis
-
played when turning ON
the transceiver.
OFF:
•
Battery voltage is not dis
-
played when turning ON the transceiver.
Signal Moni
While
using a DTMF code sig
-
naling, select whether or not to
sound DTMF tones.
ON: DTMF tones sound.
•
OFF: No DTMF tones sound.
•
* You can assign other functions to these keys if you use CS-
G88-T
(purchase separately). For more
information about functions, see the operating guide for the IC-
G88-T on the Icom website.
PROGRAMMING SOFTWARE
