Common Features
7
Superior receiver performance
The IC-FR5100 series has the class leading receiver
performance of selectivity and intermodulation
rejection. It improves the quality of the repeater
service even under congested band conditions.
Two RF modules in one unit
The IC-FR5100 series has an internal space for
installing another RF unit. Two RF modules* can be
installed and can be programmed and operated
independently. LEDs on the front panel show both
channel conditions.
* Optional UR-FR5100/UR-FR6100 required.
Voice scrambler
The built-in inversion type* voice scrambler provides
secure conversation as standard. When a more
secure system is required, the 32 code non-rolling
type voice scrambler UT-109R* and 1020 code
rolling type UT-110R* are available as an option. In
IDAS digital mode, the IDAS system provides secure
communication using a 15-bit (about 32,000 keys)
digital voice scrambler.
*
These voice scramblers (inversion type, UT-109R
and UT-110R) are available with analog mode only.
Built-in audio compander*
The built-in audio compander improves the signal to
noise ratio and provide clear audio.
* Analog mode only.
Other features
• PTT priority setting (Local Mic., external PTT or
repeater operation)
• 5-Tone and DTMF encoder/decoder*
• CW ID transmitter
• Analog wide/narrow (12.5/25, 12.5/20kHz) channel
spacing programmable*
• Normal and priority scan
• Convenient key assign stickers supplied
• Quick and easy programming from a PC
• Beat cancel capability
• Low voltage alert*
* For analog mode only
25W 100% duty cycle operation
Employing a high stability
±
0.5ppm oscillator and
high performance power amplifier, the IC-FR5100
series provides a reliable 100% duty cycle operation
at 25W output
32 channel capacity and 5 programmable
buttons
The 12-digit dot-matrix display, 5 programmable
buttons, 32 memory channels and internal speaker
allow you to use the repeater as a simple base
station or to check repeater activity.
D-SUB 25-pin accessory connector
The IC-FR5100 series has a programmable D-SUB
25-pin accessory connector for connecting
various trunking controllers or external remote
control devices. Also, modulation/demodulation
signals can be input/output from the D-SUB
connector.
19-inch rack mount, 2U height low profile design
The IC-FR5100 series uses only 2U height. This low
profile configuration allows you to stack multiple
units in an industry standard 19-inch rack and
provides great space efficiency.
Two RF units can be installed in the unit. (Left side is an
option.)
Multiple CTCSS, DTCS tone and RAN code
decode
The IC-FR5100 series decodes multiple CTCSS
and DTCS as well as digital RAN (Radio Access
Number) codes on a per channel basis (up to 16
tones/codes) and downlinks the received signal
with a specified tone/code. This function is useful
for sharing a channel with multiple groups and
provides quiet stand-by while using other groups.
