background image

IMPORTANT

READ THIS  INSTRUCTION  MANUAL 

CAREFULLY

 

before attempting to operate the re-

peater.

SAVE THIS INSTRUCTION MANUAL–

 This 

manual contains important safety and operating in-
structions for the IC-FR5000/IC-FR6000 

vhf/uhf

 

fm

 

repeaters

.

EXPLICIT DEFINITIONS

WORD

DEFINITION

R

WARNING

Personal injury, fire hazard or electric 
shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk 
of personal injury, fire or electric shock.

R

 

WARNING HIGH VOLTAGE! NEVER

 at-

tach an antenna or internal antenna connector during 
transmission. This may result in an electrical shock or 
burn.

R

 

WARNING HIGH VOLTAGE! NEVER

 in-

stall the antenna at any place that person touch the 
antenna easily during transmission. This may result in 
an electrical shock or burn.

R

 

WARNING!  NEVER

  apply  AC  to  the  DC 

power receptacle on the repeater rear panel. This 
could cause a fire or damage the repeater.

R

 

WARNING! NEVER

 apply more than 16 V DC, 

such as a 24 V battery, to the DC power receptacle 
on the repeater rear panel. This could cause a fire or 
damage the repeater.

R

 

CAUTION! NEVER

 let metal, wire or other ob-

jects touch any internal part or connectors on the rear 
panel of the repeater. This may result in an electric 
shock.

R

 

CAUTION! NEVER

 expose the repeater to 

rain, snow or any liquids.

DO NOT

 use or place the repeater in areas with 

temperatures  below  –30°C  (–22°F)  or  above  
+60°C (+140°F). Be aware that temperatures can ex-
ceed 80°C (+176°F), resulting in permanent damage 
to the repeater if left there for extended periods.

DO NOT

 place the repeater in excessively dusty envi-

ronments or in direct sunlight.

DO NOT

 put anything on top of the repeater. This will 

obstruct heat dissipation.

Place the repeater in a secure place to avoid inadver-
tent use by children.

BE CAREFUL!

 The heatsink will become hot when 

operating the repeater continuously for long periods.

BE CAREFUL!

 If a linear amplifier is connected, set 

the repeater’s RF output power to less than the linear 
amplifier’s maximum input level, otherwise, the linear 
amplifier will be damaged.

Use Icom microphones only (optional). Other manu-
facturer’s microphones have different pin assign-
ments, and connection to the repeater may damage 
the repeater.

Icom optional equipment is designed for optimal per-
formance when used with this repeater. We are not 
responsible for the repeater being damaged or any 
accident caused when using non-Icom optional equip-
ment.

For U.S.A. only

CAUTION:

 Changes or modifications to this repeater, 

not expressly approved by Icom Inc., could void your 
authority to operate this repeater under FCC regula-
tions.

PRECAUTIONS

Icom, Icom Inc. and the Icom logo are registered trademarks 
of Icom Incorporated (Japan) in the United States, the United 
Kingdom, Germany, France, Spain, Russia and/or other 
countries.

i

Содержание iC-FR5000

















Отзывы: