Icom IC-FR4000 Series Скачать руководство пользователя страница 2

i

IMPORTANT

READ THIS INSTRUCTION MANUAL
CAREFULLY

before attempting to operate the re-

peater.

SAVE THIS INSTRUCTION MANUAL–

This

manual contains important safety and operating in-
structions for the IC-FR4000.

EXPLICIT DEFINITIONS

R

WARNING HIGH VOLTAGE! NEVER

at-

tach an antenna or internal antenna connector during
transmission. This may result in an electrical shock or
burn.

R

NEVER

apply AC to the [BATTERY] terminals on

the repeater rear panel. This could cause a fire or
damage the repeater.

R

NEVER

apply more than 16 V DC, such as a 24 V

battery, to the [BATTERY] terminals on the repeater
rear panel. This could cause a fire or damage the re-
peater.

R

NEVER

let metal, wire or other objects touch any

internal part or connectors on the rear panel of the re-
peater. This may result in an electric shock.

R

NEVER

expose the repeater to rain, snow or any

liquids.

AVOID

using or placing the repeater in areas with tem-

peratures below –30°C (–22°F) or above +60°C
(+140°F). Be aware that temperatures on a vehicle’s
dashboard can exceed 80°C (+176°F), resulting in per-
manent damage to the repeater if left there for ex-
tended periods.

AVOID

placing the repeater in excessively dusty envi-

ronments or in direct sunlight.

AVOID

putting anything on top of the repeater. This will

obstruct heat dissipation.

Place the repeater in a secure place to avoid inadver-
tent use by children.

BE CAREFUL!

The heatsink will become hot when op-

erating the repeater continuously for long periods.

BE CAREFUL!

If a linear amplifier is connected, set

the repeater’s RF output power to less than the linear
amplifier’s maximum input level, otherwise, the linear
amplifier will be damaged.

Use Icom microphones only (optional). Other manu-
facturer’s microphones have different pin assignments,
and connection to the IC-FR4000 may damage the re-
peater.

For U.S.A. only

CAUTION:

Changes or modifications to this repeater,

not expressly approved by Icom Inc., could void your
authority to operate this repeater under FCC regula-
tions.

PRECAUTION

WORD

WARNING

CAUTION

NOTE

DEFINITION

Personal injury, fire hazard or electric 
shock may occur.

If disregarded, inconvenience only. 
No risk of personal injury, fire or 
electric shock.

Equipment damage may occur.

Icom, Icom Inc. and the 

logo are registered trademarks

of Icom Incorporated (Japan) in the United states, the United
Kingdom, Germany, France, Spain, Russia and/or other coun-
tries.

Содержание IC-FR4000 Series





















Отзывы: