Receiving
▒
To edit the Phone number with the 10-keypad:
APCO P25 Mode Operation
➥
When a status transmitted Status Message is
automatically transmitted.
• The Busy indicator lights green while
receiving, and lights red while transmitting
an acknowledgement or the Status Message.
• The function display does not change while
transmitting.
▒
Input the phone number directly with the 10-
▒
keypad.
▒
• Push [Digital Button] (or [Phone]) to clear a
▒
code.
▒
▒
▒
▒
■
Phone call
Transmitting
The transceiver can make a Phone call that is
similar to standard phone calls. A transceiver and
a PSTN (Public Switched Telephone Network) can
access each other.
If h
b
i
g
d th
▒
5
Push [PTT] to make a Phone call to the target
telephone station.
• The Transmit indicator lights red.
• Beeps (PiPi) sound after the Phone call is
connected to the target telephone station.
• If your Phone call is not connected, push [Digital
Button] (or [Phone]) to return to normal operation
If no phone number is pre-programmed, the
Phone call function is not available.
[Digital Button] or [Phone] key assignment is
necessary to transmit the Phone call.
1
Push [Digital Button] to enter the digital call
type selection mode.
▒
✔
Quick access
▒
Button] (or [Phone]) to return to normal operation.
6
Push and hold [PTT] and speak into the
microphone.
7
Release [PTT] to receive.
8
After the conversation is finished, push [Digital
Button] (or [Phone]) to disconnect the Phone call
and return to normal operation.
▒
Push [Phone] to enter the phone number
▒
selection mode directly. In this case, skip step
▒
2
. Go to step
3
.
2
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select “PHONE.”
Receiving
1
When a Phone call is received;
• The Busy indicator lights green.
• The ringer sounds. (Depending on the pre-
setting.)
• “PHONE CALL” blinks.
• The phone number of the calling telephone station
3
Push [Digital Button] again to enter the phone
number selection mode.
• A pre-programmed phone number and text are
displayed.
• The phone number of the calling telephone station
is displayed.(Trunking mode only.)
• “ ” blinks.
2
S
k i t th i
h
hil
hi d
4
Push [CH Up] or [CH Down], or rotate
[CH Up/Down] to select the desired phone
number.
• Push and hold [Digital Button] (or [Phone]) for 1
sec to cancel and return to normal operation.
2
Speak into the microphone while pushing and
holding [PTT].
• The Transmit indicator lights red.
3
Release [PTT] to receive.
4
After the conversation is finished, push
[Digital Button] (or [Phone]) to hang up and
return to normal operation.
53
p
• The phone digits (0 to 9, M and #) can be edited
with the 10-keypad*. (Depending on the pre-set
value.)
*10-key models only.
