Icom IC-F8100 Скачать руководство пользователя страница 17

Страница: 17 / 72

2001 NEW

RECEIVE AND TRANSMIT

2001 NEW

Quic

k Ref

erence

■

Basic voice transmit/receive

First, check the following.

➥

The microphone and external speaker are con-

nected.

➥

No “

,” “

” or “

” mute icon appears.

• If “

,” “

” or “

” appears, push

[MUTE]

(

) one or

more times to turn OFF the mute.

Mute icon

Push

[

]

[

]

to select the desired receive chan-

nel.

•

The S-meter shows signal strength when signal is re-
ceived.

Push

[ +]

[ –]

to adjust a desired audio level

when receiving a signal.

• If the bass or treble of the receive audio is too strong,

set “Clarifier” to ON in the User Menu

and adjust to ob-

tain clear audio. (See page 15 for the Clarifier function
details.)

• If the audio is distorted, select the suitable operating

mode. (See page 10 for the Mode selection details.)

Push

[TUNER]

(9) once or twice to enter the an-

tenna tune mode.

• The “Auto Tune” or “Manual Tune” screen sequentially

appears.

When the transceiver is connected to an optional

antenna tuner and “Auto Tune” screen is selected,
push

[

]

to start auto tuning.

• The display shows the antenna SWR.
• If the antenna cannot be tuned after 20 seconds, the

tuning circuit is automatically bypassed.

• After tuning is finished, the auto tune automatically

stops transmitting.

• Push

[

]

to manually stop transmitting, if necessary.

• Push

[Through]

(

§§

) to turn OFF the AT-140 (bypass).

When the transceiver is connected to another an-

tenna tuner, or directly connected to an antenna
and the “Manual Tune” screen is selected, push

[

]

to start transmitting and tune the antenna.

• The display shows the antenna SWR.
• Push

[

]

to stop transmitting.

After tuning is finished, push

[TUNER]

(9) once or

twice to return to the normal operating screen.

To transmit on the channel, hold down

[PTT]

on the

microphone, and speak at a normal voice level.

• The RF meter shows the output power.

Release

[PTT]

to receive.

Содержание IC-F8100









































































Результаты поиска

Содержание IC-F8100

Отзывы:

Icom IC-F8100, Инструкция по эксплуатации, Страница: 17 / 72

Результаты поиска

Содержание IC-F8100

Отзывы: