33
6
BATTERY CASE
■
Optional battery case (BP-237)
When using the optional battery case attached to the trans-
ceiver, install 6
×
AA (LR6) size alkaline batteries as illustrated
at right.
q
Hook your finger under the latch, and open the cover in the
direction of the arrow (
q
). (Fig.1)
w
Then, install 6
×
AA (LR6) size alkaline batteries. (Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Do not pin the ribbon under the batteries.
e
Close the cover by fitting in the direction of the arrow (
w
)
first, then check the latch is in place (
e
). (Fig.1)
• Be sure the gasket is set correctly, and do not protrude from the
battery case. (Fig.3)
CAUTION:
• When installing batteries, make sure they are all the same
brand, type and capacity. Also, do not mix new and old
batteries together.
• Keep battery contacts clean. It’s a good idea to clean bat-
tery terminals once a week.
q
BP-237
Fig.1
Fig.2
Fig.3
e
Latch
w
Gasket
5
6
IC-F70_F80-1.qxd 05.1.18 4:26 PM Page 33 (1,1)