manualshive.com logo in svg

Icom IC-F70DS, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-F70DS Скачать руководство пользователя страница 35

31

5

BATTERY CHARGING

■

Optional battery chargers

ï

AD-110 installation

q

Install the AD-110 desktop charger adapter into the holder
space of the BC-119N/BC-121N.

w

Connect the plugs of the BC-119N/BC-121N to the AD-110
desktop charger adapter with the connector, then install
the adapter into the charger with the supplied screws.

ï

Rapid charging with the BC-119N+AD-110

The optional BC-119N provides rapid charging of battery
packs. The following items are additionally required.
• AD-110 charger adapter
• An AC adapter (may be supplied with BC-119N depending

on version) or the DC power cable (OPC-515L/CP-17L).

AD-110 charger 
adapter is installed 
in BC-119N.

AC adapter
(Not supplied with 

some versions.)

Optional OPC-515L (for 13.8 V 
power source) or CP-17L (for 12 
V cigarette lighter socket) can be 
used instead of the AC adapter.

BP-235

TRANSCEIVER

AD-110

Connectors

q

Screws supplied 
with the charger 
adapter

Plugs

w

5

q

Insert the battery pack
with/without the transceiver
into the charger.

• The charge indicator lights

green.

w

Charge the battery pack
approx. 2.5 hours, depend-
ing on the remaining power
condition.

IC-F70_F80-1.qxd  05.1.18 4:26 PM  Page 31 (1,1)

Содержание IC-F70DS

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды