2
PANEL DESCRIPTION
2-2
Front, top and side panels (for the Portable type transceiver)
[Emer]
[P1]
[P2]
[Selector]
[VOL]
[Back]
[PTT]
Status
indicator
Microphone
Function
Display
Ten-Key
Pad
[F2]
[F3]
microSD
Card Slot
Micro USB
Connector
Antenna
Connector
Multi-
connector
[F1]
Speaker
D
About the transceiver types
There are 2 types of transceivers.
IC-F7010S, IC-F7020S, IC-F7040S
: Simple key types
IC-F7010T, IC-F7020T, IC-F7040T
: Ten-key types
D
About the Status indicator
• Lights white, then blinks red, yellow, and green when
turning ON the transceiver.
•Lights red while transmitting.
• Lights green while receiving a signal, or when the
squelch is open.
• Blinks magenta when the battery is exhausted.
D
About the Multi-connector
Connects to an optional speaker microphone or
headset.
CAUTION:
DO NOT
use the transceiver without the
connector cover or optional device attached.
The transceiver meets IP68 requirements for dust-
tight and waterproof protection only when the
connector cover or the optional device is attached.
D
About the Software key functions
NOTE:
Dealers can assign the Software key
functions to the keys, keypads, and the AB Switch.
L
See page 2-11 for details.
AB Switch
[Up]/[Down]
[Right]/[Left]
[OK]
The illustration is of the Ten-key types.