Icom IC-F7000, Инструкция по эксплуатации

Страница: 20 / 68

ï Preamp
The preamp amplifies received signals in the front
end circuit to improve the S/N ratio and sensitivity.
Turn this function ON when receiving weak signals.
• Channel indication (p. 7)
q
While pushing and holding
[OK ≈ ≈ ]
, turn power ON
to enter the
Initial set mode
.
w
Push [ √ √ ] to select ‘GENERAL,’ then push [OK ≈ ≈ ] .
e
Push [ √ √ ] to select ‘PRE AMP,’ then push [ Ω Ω CLR]
or [OK ≈ ≈ ] to turn the preamp function ON.
r
Turn power OFF and ON.
• Frequency indication (p. 7)
q
Push [I/O] to enter the Quick set mode while trans-
ceiver’s power is ON.
w
Push
[ √ √ ]
to select ‘PRE AMP,’ then push
[ Ω Ω CLR]
or
[OK ≈ ≈ ]
to turn the preamp function ON.
e
Push
[I/O]
to exit the Quick set mode and return to
the normal operating mode.
Q-SET - MODE(VFO)
-- MODE ------ USB
è - RF - GAIN --- 9
-- SQL - LV ---- 30
--PRE - AMP - -- ç - ON - å
Q-SET - MODE(VFO)
--MODE ---- -- ç - USB ---- å
è - RF - GAIN --- 9
-- SQL - LV ---- 30
-- PRE - AMP --- ON
[I/O] [ Ω CLR]/[OK ≈ ]
[ ∫ ]/[ √ ]
é - PASSWORD --- LOCK
--PRE - AMP -- -- ç - ON - å
è-CLOCK------12:00
-- VOL - MIN ---- 0
--COMP-------ç-ON-å
é - SELCALL ----
-- ALE --------
è-SCAN-------
--GENERAL - --- å
--I/O--------
SET - MODE
--CH - LIST - --- å
è - SCAN -------
-- ID - LIST ----
-- I/O --------
■
Functions for receive (Continued)
17
3
RECEIVE AND TRANSMIT
ï RIT function
The RIT (Receive Incremental Tuning) function com-
pensates for off-frequencies of communicating sta-
tions. The function shifts the receive frequency up to
±150 Hz without moving the transmit frequency.
q
Push
[I/O]
to enter the
Quick set mode
while trans-
ceiver’s power is ON.
w
Push
[ ∫ ∫ ]
or
[ √ √ ]
to select ‘RIT.’
e
Push [ Ω Ω CLR] or [OK ≈ ≈ ] to tune the frequency.
• The transmit frequencies are not shifted.
r
Push
[I/O]
to exit the
Quick set mode
and return to
the normal operating mode.
When cancelling the RIT function, tune the ‘RIT’ in
the
Quick set mode
to ‘0.’
é - SQL - LV ---- 30
-- FILTER ---- WIDE
--RIT ----- -- ç - 0 - å
-- MODE ------ USB
-- BEEP - LV --- 5
[I/O] [ Ω CLR]/[OK ≈ ]
[ ∫ ]/[ √ ]