Icom IC-F6121D, Инструкция по эксплуатации, Страница: 15 / 24

11
2
BASIC OPERATION
2
■
User set mode
User set mode can be accessed with ‘Power ON’ function. In
this case, all set mode items are available.
User set mode allows you to set seldom-changed settings
and you can “customize” the transceiver operation to suit
your preferences and operating style.
Entering the user set mode:
q
While holding down [.1] and [.2] , push [ ] to turn the
power ON.
• Turn power OFF in advance.
• Hold down
[.1] and [.2] continuously until “SET MODE” ap-
pears on the display.
[P1] [P2]
[ ]
w
Hold down
[.0]
for 1 sec. to enter user set mode.
[P0]
e
Push
[.0]
several times to select the appropriate item.
Then, push [Up] or [Down] to set the desired level/condi-
tion.
• Available set mode functions are Backlight , Beep , Beep Level,
Ringer Level, SQL Level , AF Min Level , Mic Gain , Horn , Bat-
tery Voltage , Signal Moni and Lone Worker .
[P0] [Up]/[Down]
r
Hold down [ ] for 1 sec. to turn power OFF, then ON
again to exit set mode.
[ ]
User set mode is also available using a programmable key.
Please refer to p. 6
[User Set Mode]
section for instructions
regarding using the key assigned for user set mode.
[User Set Mode]
is allowed for the quick item selection.
Set “Enable” for the often used items with the CS-F3100D/
F5120D
cloning software
.