Icom IC-F61-L, Инструкция по эксплуатации

Страница: 55 / 64

46
6
SPEAKER-MICROPHONE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
■
Attachment
Attach the connector of the speaker-microphone into the [SP MIC]
connector on the transceiver and tighten the screw.
Detaching:
Unscrew (
q
),
then detach the
jack cover (
w
).
Attaching:
Attach the
jack cover
(
e
), then
tighten the
screw (
r
).
CAUTION: Attach the
speaker-microphone’s
connector securely to
prevent accidental
dropping, or water
intrusion in the connector.
q
w
e
r
IMPORTANT: KEEP the [SP MIC] jack cover attached (trans-
ceiver) when the speaker-microphone is not in use. Water will
not get into the transceiver even if the cover is not attached,
however, the terminals (pins) will become rusty, or the trans-
ceiver will function abnormally if the connector becomes wet.
CAUTION: For ATEX compliance in hazardous areas, the jack
cover just also be attached when the HM-138 is not being used.