8
BIIS 1200 SYSTEM OPERATION
8-5
D
Transmitting a Group call
<Menu operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
(Menu > Signaling/Call >
Call List Select
)
1� Push [Menu] to display the Menu screen�
2� Push [Left] or [Right] to select “Signaling/Call,”
then push [OK]�
3� Push [Up] or [Down] to select “Call List Select,”
then push [OK]�
4� Push [Up] or [Down] to select a Group ID�
TIP:
About the Direct Dial function
When you select “Direct Dial” at the end of the
list, you can directly enter a Group ID using
[Up]/[Down] or Ten-key pad�
L
Push [Left]/[Right] to move the cursor and push
[Back] to delete the entered ID�
L
After entering, push [OK] to set the ID�
5� Push [PTT] to transmit the Group call�
6� Hold down [PTT] and speak at your normal voice
level�
7� Release [PTT] to receive�
8�
After the communication is fi nished, push [Back]
to send a Clear down signal to terminate the
connection�
<Key operation>
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
Using [Call List Select]:
1� Push [Call List Select] to display the “Call List
Select” screen�
2� Push [Up] or [Down] to select a Group ID�
L
See “
TIP: About the Direct Dial function
” in step 4
to the left�
3� Push [PTT] to transmit the Group call�
4� Hold down [PTT] and speak at your normal voice
level�
5� Release [PTT] to receive�
6�
After the communication is fi nished, push [Back]
to send a Clear down signal to terminate the
connection�
Transmitting a call
