20
3
BASIC OPERATION
■
User set mode
User set mode is accessed at power ON and allows you to set
seldom-changed settings. You can “customize” the transceiver op
-
eration to suit your preferences and operating style.
Entering the user set mode:
q
While pushing and holding [
] and [
], rotate [VOL] to
power ON.
• Turn power OFF in advance.
• “
SET MODE
” appears for 1 sec.
w
Push and hold [P0] for 1 sec. to enter user set mode.
e
Push [P0] momentarily to select the appropriate item.
Then push [
] or [
]
to set the desired level/condition.
• Available set mode functions are
Backlight, Beep, SQL Level,
Ringer Level, AF Min level, Mic Gain, VOX Gain*, VOX Delay*,
Battery Voltage, Signal Moni, Vibration and Lone Worker.
r
Push and hold [P0] again to exit set mode.
* Appears when the optional headset is connected.
User set mode is also available using a programmable key. Please
refer to p. 13 [User Set Mode] section for instructions regarding
using the key assigned for user set mode.
NOTE: [
], [
] and [P0] activate while in the user set
mode regardless of the assigned key functions.
