8
3
BASIC OPERATION
N
Turning power ON
q
Rotate
[VOL]
to turn the power ON.
w
If the transceiver is programmed for a start up passcode,
input the digit codes as directed by your dealer.
s 4HE KEYS IN THE TABLE BELOW CAN BE USED FOR PASSWORD INPUT
s 4HE TRANSCEIVER DETECTS NUMBERS IN THE SAME BLOCK AS IDENTICAL
4HEREFORE hv AND hv ARE THE SAME
e
7HEN THE h0!337/2$v INDICATION DOES NOT CLEAR AFTER IN
-
putting 4 digits, the input code number may be incorrect.
Turn the power off and start over in this case.
N
Channel selection
Push
[UP]
or
[DOWN]
, or rotate
[ROTARY SELECTOR]
to select the desired system channel or talk group, in se-
quence.
s 5P TO PREPROGRAMMED CHANNELS CAN BE SELECTED VIA
[ROTARY
SELECTOR]
.
N
Call procedure
7HEN YOUR SYSTEM EMPLOYS TONE SIGNALLING EXCLUDING
CTCSS and DTCS), the call procedure may be necessary
prior to voice transmission. The tone signalling employed may
be a selective calling system which allows you to call specific
station(s) only and prevent unwanted stations from contact-
ing you.
q
Select the desired DTMF encode channel according to
YOUR 3YSTEM /PERATORS INSTRUCTIONS
s 4HIS MAY NOT BE NECESSARY DEPENDING ON PROGRAMMING
s 2EFER TO PAGES OR FOR SELECTION
w
Push the
[PTT]
.
e
After transmitting a DTMF code, the remainder of your
communication can be carried out in the normal fashion.
Selective calling
Non-selective calling
KEY
NUMBER
0
5
4
9
3
8
2
7
1
6
UP
