21
3
dPMR OPERATION
■
Transmitting a call (continued)
D
Transmitting an SDM
You can send a pre-programmed SDM to an individual station
or to group stations.
The transceiver has 10 memories to store messages.
q
Push
[dPMR Button] to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push
[CH Up] or [CH Down] to select a desired Individual
ID or Talkgroup ID.
e
Push
[dPMR Button] again to enter the application selec-
tion mode.
• “
STATUS” is displayed.
r
Push
[CH Up] or [CH Down] to select “MESSAGE.”
t
Push
[dPMR Button] again to enter the SDM selection
mode.
• The pre-programmed SDM is displayed.
y
Push
[CH Up] or [CH Down] to select a desired SDM.
• You can rewrite the contents of the SDM. See the next page for
details.
u
Push
[Call] to transmit the SDM to the selected station or
talkgroup.
• “
WAIT” is displayed while transmitting.
• “
OK” is displayed when an acknowledgement is received.
• “
FAILED” is displayed when no acknowledgment is received.
i
After a specified time period, the transceiver will return to
the stand-by mode.
dPMR CALL TXCE CLR
MESSAGE 01
Message 1
