background image

24

4

BATTERY CHARGING

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

AD-106 installation

 

D

The AD-106 

charger

 

adapter

 must be installed into the BC-

119N or BC-121N before battery charging.

q  

Connect the AD-106 

charger

 

adapter

 and the BC-119N/

BC-121N.

 Install the AD-106 into the holder space of the BC-119N/
BC-121N with the supplied screws.

Screws supplied 
with the charger 
adapter

AD-106

Plugs

Sockets

This illustration shows 
the BC-119N.

Rapid charging with the BC-119N+AD-106

 

D

The  optional  BC-119N  provides  rapidly  charges  the  Li-ion 
battery pack.
Charging time: Approximately 3 hours with the BP-232WP

 The following items are additionally required.
• AD-106 

charger

 

adapter

 (purchase separately)

•  An AC adapter (may be supplied with BC-119N, depending 

on version) or the OPC-515L/CP-23L DC power cable.

AC adapter
(A different type, or no AC 

adapter  is  supplied,  de-
pending on the version.)

Optional  OPC-515L*  (for 
13.8  V  power  source)  or 
CP-23L (for 12 V cigarette 
lighter socket) can be used 
instead of the AC adapter.

CAUTION:  NEVER  connect  the  OPC-
515L  to  a  power  source  using  reverse 
polarity. This will ruin the battery charger.
White line:        Black line

 

:

*

Transceiver

Battery
pack

AD-106  charger 
adapter is installed 
in the BC-119N.

Turn OFF
the power

Содержание IC-F3262DT









































Отзывы: