15
3
dPMR OPERATION
■
Receiving a call (continued)
D
Receiving an SDM
When an SDM is received:
q
• Rings sound.
• The calling station’s ID (or name) and the SDM are displayed.
NOTE:
When the SDM includes more than 12 charac-
ters, it automatically scrolls.
• Push
[Status Up]
or
[Status Down]
to stop scrolling, or
manually scroll the message.
• “ ” appears.
Push
w
[Clear]
to return to the stand-by mode.
D
Receiving a Stun, Kill or Revive call
If an Individual call with a Stun or Kill command is received
from a specified station, the transceiver will display “SORRY,”
and becomes unusable.
NOTE:
If the transceiver receives a Stun, Kill, or Revive
command from a station other than the specified ones,
the call will be ignored, and the transceiver will not be
stunned, killed, or revived.
➥
When a Stun command is received, the transceiver is disa-
bled*
1
. In that case, receiving a Revive command or input-
ting the password*
2
is necessary to operate the transceiver
again.
*
1
Depending on the preprogrammed settings, receiving a Stun
command inhibits only transmission, but the transceiver still can
receive.
*
2
Depending on the preprogrammed settings.
➥
When a Kill command is received, the transceiver is disa-
bled. In that case, re-programming the transceiver is nec-
essary to operate the transceiver again.
D
Receiving a Status Polling call
If a Status Polling call is received, the transceiver will auto-
matically transmit its current status.
dPMR CALL TXCE CLR
ID 0000001
Message 1
Calling station’s ID
The received
message
dPMR CALL TXCE CLR
ID 0000001
RETURN TO
OFFICE
Scrolls
