15
3
BASIC OPERATION
D
TX code edit
(5-tone operation only)
If the transceiver has a key assigned to TX Code CH Select
or TX Code Enter, TX code contents can be edited within the
allowable digits.
USING [TX CODE CH SELECT]:
q
Push [TX Code CH Select] to enter the TX code channel
selection mode.
• Select the desired channel before entering the TX code channel
selection mode, if necessary.
w
Hold down [TX Code CH Select] for 1 second to enter the
TX code edit mode.
• The digit to be edited blinks.
e
Push [TX Code CH Select] to select the desired digit to be
edited.
r
Push [CH Up] or [CH Down] to select the desired digit.
t
Push [TX Code CH Select] to set. The digit to the right will
automatically blink.
y
Repeat
r
and
t
to edit all allowable digits.
u
After editing, push [TX Code CH Select] to set.
• Return to the stand-by mode.
i
Push [Call] to transmit.
USING [TX CODE ENTER]:
q
After pushing [TX Code CH Select], push [CH Up] or [CH
Down], or push [TX Code CH Up] or [TX Code CH Down]
to select the desired TX code channel.
w
Push [TX Code Enter] to enter the TX code edit mode.
• The digit to be edited blinks.
e
Push [TX Code Enter] to select the desired digit to be ed-
ited.
r
Push [CH Up] or [CH Down] to select the desired digit.
t
Push [TX Code Enter] to set. The digit to the right will au-
tomatically blink.
y
Repeat
r
and
t
to edit all allowable digits.
u
After editing, push [TX Code Enter] to set.
• Return to the stand-by mode.
i
Push [Call] to transmit.
D
DTMF transmission
If the transceiver has a key assigned for DTMF Autodial, the
automatic DTMF transmission function is available. Up to 8
DTMF channels are selectable.
q
Push [DTMF Autodial]— a DTMF channel appears.
w
Push [CH Up] or [CH Down] to select the desired DTMF
channel.
e
Push [DTMF Autodial] to transmit the DTMF code.
