background image

8

2

PANEL DESCRIPTION

 Programmable function keys

The following functions can be assigned to the [Upper] and [Lower] 
programmable function keys.
Consult your Icom dealer or system operator for details concerning 
your transceiver’s programming.

SCAN

Push to start and cancel the scanning operation.
•   When the scan started with the Power ON Scan or Auto Scan func-

tion, push to pause the scanning operation. The paused scan re-
sumes after the specified time period has passed.

PRIORITY A CHANNEL, PRIORITY B CHANNEL

Push to select the Priority A or Priority B channel.

PRIORITY A CHANNEL (REWRITE),
PRIORITY B CHANNEL (REWRITE)

 Push to select the Priority A or Priority B channel.

  Hold down [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 second to 

assign the operating channel to Priority A or Priority B channel, 
respectively.

MEMORY CHANNELS 1, 2, 3, 4

Push to directly select memory channel 1, 2, 3 or 4, if programmed. 
Consult your dealer for details.

LONE WORKER

 (p. 23)

 Push to turn the Lone Worker function OFF.

 Hold down to turn the Lone Worker function ON.

  •  When the Lone Worker function is turned ON, and no operation is 

performed for the specified time period, the Emergency function is 
automatically turned ON.

2

Содержание IC-F3101D

































































Отзывы: