background image

37

5

BATTERY CHARGING

D

 

Using the BC-192 to regular charge the BP-264

The BC-192 provides regular charging of the Ni-MH battery pack 
(BP-264 only). Never use for any other battery pack.
Charging time for the BP-264 (with BC-147S): Approximately 16 hours.

The following item is additionally required:
•  A power adapter (not supplied with some versions) or the DC 

power cable (OPC-515L).

Power adapter

(A different type, or 

no power adapter 
is supplied, 
depending on the 
version.)

Charging time period differs 
depending on the input voltage.
12 V
13.8 V
16 V

: Approx. 36 hours
: Approx. 21 hours
: Approx. 16 hours

About OPC-515L
White line:
Black line

 

:

CAUTION:  NEVER

  connect  the 

OPC-515L  to  a  power  source 
using reverse polarity. 
This will ruin the battery charger.

*

Battery pack

Transceiver

Turn OFF the power

Optional OPC-515L* 
(for power source) 
can be used instead 
of the power adapter.

Screws*

Self tapping screw: 
M3.5 × at least 30 mm)

*Purchase separately.
   Using screws is recom-

mended to secure the 
charger.

Status indicator
Lights green while charging.
NOTE:
The status indicator will not go 
out even after a battery pack is 
fully charged.

Содержание IC-F3100D series

































































Отзывы: