Icom IC-F3061T, Регулировка

Страница: 3 / 10

Adjustment for IC-F3061T/S,IC-F3161T/S,IC-F3161DT/DS
Adjustment No. Value REF No. CK.POINT
Adjustment Condition & Tuning
MODULATION Set the "MOD N" to "60" on the ADJ screen.
BALANCE
ADJUSTMENT While transmitting, push and hold "P0" key
adjust the wave form on the ADJ screen
BAL(Narrow).
ADJUSTMENT Freq
(ADJ screen)
squware BAL(Narrow)
ANT connector
wave
MODULATION Connect the AG to the ext. MIC jack,
ADJUSTMENT and set the AG as;
Freq.=1kHz
Level=150mVrms
Adjust the deviation as below.
band first (MOD*C),then adjust the deviation
in the upper and lower edge.
NARROW
ADJUSTMENT ITEM
ADJUSTMENT VALUE. (ADJ screen)
around 155MHz MOD N C MOD N C
ANT connector
around 136MHz MOD N L ±2.10 ±0.05kHz MOD N L
around 174MHz MOD N H MOD N H
WIDE
ADJUSTMENT ITEM
ADJUSTMENT VALUE.
around 155MHz MOD W C MOD W C
ANT connector
around 136MHz MOD W L ±4.10 ±0.05kHz MOD W L
around 174MHz MOD W H MOD W H
MID
ADJUSTMENT ITEM
ADJUSTMENT VALUE.
around 155MHz MOD M C MOD M C
ANT connector
around 136MHz MOD M L ±3.25 ±0.05kHz MOD M L
around 174MHz MOD M H MOD M H
around 155MHz
Adjust the deviation in the center of the
PAGE3