Icom IC-F3011, Инструкция по эксплуатации

Страница: 17 / 48

11
2
PANEL DESCRIPTION
MONITOR KEY
➥
Push to mute and release the CTCSS (DTCS) or 2Tone* squelch
mute. Open any squelches/deactivate any mutes while pushing
this key.
(LMR operation only)
* Available for the IC-F3013/F4013 only.
➥
Activates one of (or two of) the following functions on each chan-
nel independently: (PMR operation only)
• Push and hold to un-mute the channel (audio is emitted; ‘Audible’).
• Push to mute the channel (audio is not emitted; ‘Inaudible’).
• Push to send a ‘reset code’ after the communication is finished.
NOTE: The un-mute condition (‘Audible’ condition) may auto-
matically return to the mute condition (‘Inaudible’ condition)
after a specified period.
D For IC-F3013/IC-F4013 only
DTMF AUTODIAL KEY
Push to transmit the programmed DTMF code.
CALL KEYS
Push to transmit a 2/5-tone code.
• Call transmission is necessary before you call another station depend-
ing on your signalling system.
• [Call A] and/or [Call B] keys may be available when your system em-
ploys selective ‘Individual/Group’ calls. Ask your dealer which call is
assigned to each key.
EMERGENCY SINGLE/EMERGENCY REPEAT KEYS
➥
Push and hold for the specified time period to transmit an emer-
gency call once or repeatedly.
➥
When
[Emergency Single (Silent)]
or
[Emergency Repeat (Silent)]
is pushed, an emergency call is transmitted with no beep emission.
• If you want to cancel the emergency call, push (or push and hold)
the key again before transmitting the call.
• The emergency call is transmitted one time only or repeatedly until
receiving a control code depending on the pre-setting.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20