![background image](http://html2.mh-extra.com/html/icom/ic-f29sr/ic-f29sr_operating-instructions-manual_4224784007.webp)
5
Section
4
SETTINGS
Setting the Beep function
The Beep function can be turned ON or OFF. When it is
OFF, the channel announcement is also turned OFF.
NOTE:
You should turn ON the Beep function when
you set the microphone gain, the squelch level or the
group code number to check the current level setting
with the beep sounding. (pp. 8
–
11)
Rotate
q
[VOL]
to turn OFF the transceiver power.
Set
w
[ROTARY SELECTOR]
to any channel other
than Channel 16.
While holding down
e
[Lower]
, rotate
[VOL]
to turn ON
the power to enter the Beep level adjustment mode.
Push
r
[Lower]
to turn the Beep function ON or OFF.
• When a beep sounds after pushing
[Lower]
, the Beep
function is ON. When no beep sounds after pushing
[Lower]
, the Beep function is OFF.
• If desired, push
[Upper]
to adjust the Beep level. See
page 6 for details.
Rotate
t
[VOL]
to turn OFF the power to exit the Beep
level adjustment mode.
[ROTARY SELECTOR]
[VOL]
[Lower]
[Upper]