4-11
4-3 TRANSMIT ADJUSTMENTS (CONTINUED)
1) Select an adjustment item using [↑]/[↓]/[←]/[→] on the PC’s keyboard.
2) Set or modify the adjustment value as specified using [Space]/[Back Space] on the PC’s keyboard.
ADJUSTMENT
TRANSCEIVER’S
CONDITION
OPERATION
ADJUSTMENT
ITEM
VALUE
CTCSS/DTCS
DEVIATION
- Preparation -
1
–
• Set the preset memory channel
numbers on the adjust utility
window.
[CH No. FL]
19
[CH No. FC]
20
[CH No. FH]
21
- Adjustment -
Narrow
(Band low)
2
–
•
No audio signal is applied to [MIC].
[TONE Start]
Push [ENTER]
(Enters the
Adjustment mode)
3 • Transmitting
[TONE FL]
±0.35 kHz
(±0.05 kHz)
4
–
[TONE Start]
Push [ENTER]
(Saves the value)
(Band center)
5 • Transmitting
[TONE FC]
±0.35 kHz
(±0.05 kHz)
6
–
[TONE Start]
Push [ENTER]
(Saves the value)
(Band high)
7 • Transmitting
[TONE FH]
±0.35 kHz
(±0.05 kHz)
8
–
[TONE Start]
Push [ENTER]
(Saves the value)
Wide*
3
(Band low)
9 • CH No.: 22
• Transmitting
[TONE (Wide)]
±0.70 kHz
(±0.05 kHz)
Middle*
4
(Band low)
10 • CH No.: 25
• Transmitting
[TONE (Mid)]
±0.55 kHz
(±0.05 kHz)
CTCSS
DEVIATION
- Verification -
Narrow
(Band low)
1 • CH No.: 19
• Transmitting
• Connect the modulation analyzer
to the antenna connector through
the attenuator, and set it to:
HPF:
OFF
LPF:
15 kHz
De-emphasis:
OFF
Detector:
(P−P)/2
•
No audio signal is applied to [MIC].
–
±0.25~±0.50 kHz
(Band center)
2 • CH No.: 20
• Transmitting
(Band high)
3 • CH No.: 21
• Transmitting
Wide*
3
(Band low)
4 • CH No.: 22
• Transmitting
±0.50~±0.90 kHz
(Band center)
5 • CH No.: 23
• Transmitting
(Band high)
6 • CH No.: 24
• Transmitting
Middle*
4
(Band low)
7 • CH No.: 25
• Transmitting
±0.40~±0.75 kHz
(Band center)
8 • CH No.: 26
• Transmitting
(Band high)
9 • CH No.: 27
• Transmitting
Continued on the next page…
*
3
No adjustment or verification is necessary for [USA].
*
4
No adjustment or verification is necessary for [USA] and [AUS].
