manualshive.com logo in svg

Icom IC-A23, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-A23 Скачать руководство пользователя страница 3

ii

etc. Therefore, be careful when carrying with, or placing near
metal objects, carrying in handbags, etc.

DO NOT 

allow children to play with any radio equipment

containing a transmitter.

DO NOT 

operate the transceiver near unshielded electrical

blasting caps or in an explosive atmosphere.

AVOID 

using or placing the transceiver in direct sunlight or

in areas with temperatures below –10°C (+14°F) or above
+60°C (+140°F).

The use of non-Icom battery packs/chargers may impair
transceiver performance and invalidate the warranty.

Even when the transceiver power is OFF, a slight current still
flows in the circuits. Remove the battery pack or case from
the transceiver when not using it for a long time. Otherwise,
the battery pack or installed dry cell batteries will become ex-
hausted.

SUPPLIED ACCESSORIES

Accessories included with the transceiver:

Qty.

q

Antenna ........................................................................... 1

w

Belt clip............................................................................ 1

e

Handstrap........................................................................ 1

r

Battery pack (BP-200L)*.................................................. 1

t

Wall charger*  .................................................................. 1
• Carrying case (LC-147)* ............................................... 1
• HEADSET ADAPTER (OPC-967)*  ............................... 1

* The battery pack, wall charger, HEADSET ADAPTER or carry-

ing case may differ depending on version. Some versions do not
include a battery pack, wall charger, HEADSET ADAPTER or
carrying case.

q

w

e

t

r

Содержание IC-A23








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды