Icom IC-A210E, Инструкция по эксплуатации

Страница: 15 / 40

11
3
MEMORY OPERATION
0 3
n
Programming example
The following is an example showing how to program 126.000 MHz into regular memory channel 4.
“ ” appears when no frequency
has been programmed into the regular
memory channel 4.
“
MEMORY
” and the channel number
appear.
“
126.00
” appears in the standby
display.
126.00
5
134.80
RX
CH01
134.80
RX
MEMORY
CH04
134.80
RX
MEMORY
CH04
126.000
---.---
134.80
RX
MEMORY
REPLACE Ç
CH04
126.00
5
134.80
RX
MEMORY
Set a “126.000 MHz” in the
standby display
q
Push [RCL] , then rotate
[O-DIAL] to select “
MEMORY
”.
w
Push
[MEM]
, then rotate
[O-DIAL]
to select “
REPLACE
.”
r
Push [MEM] to store the desired
frequency into the selected
regular memory channel.
t
Select regular memory channel
4 with
[DIAL] .
e
“WRITE COMPLETED” is displayed
when the selected frequency is
stored.
Regular memory channel number
blinks.
TIP:
Hold down
[MEM]
for 2 seconds to program a displayed frequency into any blank memory channel automatically, after
step
q
.
NOTE:
The programming is cancelled if all regular memory channels have already programmed.