n
“TAG” channel setting
Memory channels can be specified to be skipped for the
memory channel scan. The “TAG” channel function is only
available during scan operation.
For IC-A15
q
Push
[MR]
to select memory mode.
• Select the desired BANK if desired.
w
Select the desired memory channel to be a “TAG” chan-
nel.
• Select the desired BANK if desired.
e
Push
[FUNC]
, then push
[TAG](9)
to set a “TAG.”
• “TAG” appears.
• Non-“TAG” channels are skipped during scan.
r
To cancel the “TAG” setting, repeat above steps.
For IC-A15S
q
Push
[MR]
to select memory mode.
w
Select the desired memory channel to be a “TAG” chan-
nel.
e
Push and hold
[LIGHT]
for 2 sec. to set a “TAG.”
r
To cancel the “TAG” setting, repeat the above steps.
n
Memory scan
NOTE:
Program 2 or more memory channels with “TAG”
setting to start memory scan.
q
Push
[MR]
to select memory mode.
• For IC-A15, select the desired BANK if desired. (p. 12)
w
Push
[SQL
Y
]
/
[SQL
Z
]
to set the squelch level to the
point where noise is just muted.
For IC-A15
e
Push
[FUNC]
, then push
[SCAN](2)
to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push
[
Y
]
/
[
Z
]
.
For IC-A15S
e
Push and hold
[
Y
]
/
[
Z
]
for 1 sec. to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push
[
Y
]
/
[
Z
]
.
19
5
SCAN OPERATION
No “ ” indicator appears
with the skipped channel.
“ ” indicator appears with
the scanned channel.
Decimal point blinks during
scan.
[FUNC]
[MR]
[SCAN](2)
[
Y
]
[
Z
]
r
To stop the scan, push
[CLR]
.