16
4
MEMORY OPERATION
NOTE: When programming a memory name to the pro-
grammed memory channel, operate as follow.
q
Select the desired memory channel that requires a name.
(see p. 12).
For IC-A14
w
Push
[FUNC] then push [MW](MR).
• The selected memory contents copied into frequency mode
and frequency mode is selected automatically.
e
Push
[FUNC] then push [MW](MR) again.
r
Push
[MR] momentarily to select memory name pro-
gramming mode.
t
Perform the steps
t
and
y
described at left page in “
For
IC-A14
” to program the desired memory name.
For IC-A14S
w
Push and hold
[MR] for 1 sec.
• The selected memory contents copied into frequency mode
and frequency mode is selected automatically.
e
Push and hold
[MR] for 1 sec. again.
r
Push
[MR] momentarily to select memory name pro-
gramming mode.
t
Perform the steps
t
and
y
described at left page in “
For
IC-A14S
” to program the desired memory name.
n
Copying memory contents
This function copies a memory channel’s contents into the
frequency mode. This is useful when searching for signals
around a memory channel’s frequency.
q
Push
[MR] to select memory mode.
w
Select the desired memory channel to be
copied
using
[
Y
]/[
Z
]
(or keypad and
[ENT]; for IC-A14 only)
.
• Select the desired bank if desired.
For IC-A14
e
Push
[FUNC], then push [MW](MR) to copy the memory
channel’s contents into the frequency mode.
• Frequency mode is automatically selected.
For IC-A14S
e
Push and hold
[MR] for 1 sec. to copy the memory chan-
nel’s contents into the frequency mode.
• Frequency mode is automatically selected.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
