4
2
BASIC OPERATION
1
0
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Setting the frequency in the VFO mode
(For only EXP and EUR versions.)
1) Set the MHz digit.
➥
Push [ /MHz/GRP], and then push [
∫
] or [
√
].
• The MHz digit blinks.
2) Exit the MHz Digit Selection mode.
➥
Push [ /MHz/GRP] again.
3) Set the kHz digit.
➥
Push [
∫
] or [
√
].
■
Receiving and
transmitting
1.
Setting the frequency
Setting the frequency in the Memory mode
1) Open the “MEMORY” menu.
➥
Push [ /MHz/GRP].
2) Open the “GROUPS” menu.
➥
Push [
∫
] or [
√
], and then push [ /MHz/GRP].
3) Select a desired group.
➥
Push [
∫
] or [
√
], and then push [ /MHz/GRP].
4) Select a desired channel.
➥
Push [
∫
] or [
√
].
TIP:
You can select the channel spacing in the “CH
SPACING” menu*.
* The menu may not be displayed, depending on the transceiver’s
setting. Ask your authorized Icom dealer or transceiver
administrator for details.
MENU > SETTINGS > FUNCTIONS >
CH SPACING
CAUTION:
Use of 8.33 kHz Channel Spacing of this radio
is strictly prohibited and shall not be used in Canada.