Icom IC-A110EURO Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 24

Icom IC-A110EURO Скачать руководство пользователя страница 17

14

7

CLONING

D

Data cloning

Cloning allows you to quickly and easily
transfer the programmed contents from one transceiver to
another transceiver, or, data from PC to a transceiver using
the optional CS-A110EURO cloning software.

D

Transceiver to transceiver cloning

q

Connect the OPC-591

CLONING CABLE

with adapter plugs to

the [MIC] jack of the master and slave transceivers.

• The master transceiver is used to send data to the slave trans-

ceiver.

w

While pushing and holding [

Y

] + [

Z

] + [V/M], push

[POWER] ON to enter cloning mode (master transceiver
only—power ON only for slave transceiver).

• “CLONE” appears and the

transceivers enter the clone
standby condition.

e

Push [POWER] on the mas-
ter transceiver.

• “CL-OUT” appears in the

master transceiver’s display.

• “CL-IN” appears automati-

cally in the slave trans-
ceiver’s display.

e

When cloning is finished, turn
power OFF, then ON again to
exit cloning mode.

D

Cloning using PC

Data can be cloned to and from a PC (IBM compatible) using
the optional CS-A110EURO

CLONING SOFTWARE

and the optional

OPC-478

CLONING CABLE

+ OPC-592

CLONING CABLE ADAPTER

. Con-

sult the CS-A110EURO

CLONING SOFTWARE

HELP message for

details.

D

Cloning error

When the display at right ap-
pears, a cloning error has oc-
curred.

• In this case, both transceivers automatically return to the

clone standby condition and cloning must be repeated.

]

IC-A110EURO-2 02.3.12 2:00 PM Page q (1,1)

«
...
15
16
17
18
19
...
»

Содержание IC-A110EURO

























Отзывы:

Нет отзывов