20
© June 2011 Icom America
5Tone RX Code Setting Window
Field
Description
Link A(Sec)
The amount of time the radio transmits an unmodulated signal
before transmitting the ABC (Answer Back Call) code.
ID Decode(Sec)
This timer is used when the ID Dec field in the RX Code CH
screen is set to ON. It controls how long the radio waits to
decode the entire 5 tone ID code that was received.
Ringer Repeat(Sec)
The interval between rings when a repeated ring is selected in
the Ringer field of the RX Code CH screen.
Compare Digit
Controls how many digits the radio will compare when receiving
a 5 tone code. Digits left blank will be ignored by the radio.
5Tone TX Code CH Window
Field
Description
TX Code
The 5 tone code that will be transmitted by the radio.
Input Digit
Selected digits of the 5 tone code can be modified by the radio
user via the keypad of the radio.
Text
A text tag given to the 5 tone code that is displayed on the radio.
Update
When set to ON, any 5 tone transmit code modified by the radio
user will be saved in the modified state.
Dec
The decoded answer back code is indicated when the specified
TX code is used as a station code.
Aud
When this field is set to ON, the radio releases the 5 tone mute
after an answer back code is received.
Sel
Determines if the TX Code is selectable from the front panel by
the radio user.
Содержание IC-910H
Страница 1: ...PROGRAMMING GUIDE 5 t 5 t 5 one signaling...