8-6
BASIC MANUAL
8
SET MODE
My Station
» SET >
My Station
My Call Sign (DV)
The transceiver has a total of 6 memories to save
your own call signs for use in the DV mode. You can
enter a call sign of up to 8 digits. Also, a note of up to
4 characters, for operating transceiver type, area, and
so on, can be entered.
TX Message (DV)
The transceiver has a total of 5 memories to save
short messages for simultaneous transmission in the
DV mode.
Enter a message of up to 20 alphanumeric characters
for each memory.
L
To transmit no message, select “OFF.”
My Call Sign (DD)
The transceiver has a total of 6 memories to save
your own call signs for use in the DD mode. You can
enter a call sign of up to 8 digits. Also, a note of up to
4 characters, for operating transceiver type, area, and
so on, can be entered.
Function
»
SET > Function >
Front Key Customize
[VOX/BK-IN]
(Default: VOX/BK-IN)
[AUTOTUNE/RX>CS/AFC]
(Default: AUTOTUNE/RX>CS/AFC)
The function assignments for the
/
and
/
keys on the front panel can be changed.
L
See page 8-7 about the functions.
»
SET > Function >
Remote MIC Key
[A]
(Default: Home CH)
[B]
(Default: VFO/MEMO)
[
]
(Default: UP (VFO: kHz))
[
]
(Default: DOWN (VFO: kHz))
The function assignments for the [A], [B], [▲], and [▼]
keys on the HM-243 speaker microphone can be changed.
L
See page 8-8 about the functions.
Mode Select
(Default:
✔
SSB/
✔
CW/
✔
RTTY/
✔
AM/
✔
FM/
✔
DV/
✔
DD/
✔
ATV)
Selects whether or not to enable to select the mode
by pushing the microphone’s key that “MODE” is
assigned to.
L
Displays “
✓
” when the mode is selectable.
» SET >
Function
Keyboard Type
(Default: Full Keyboard)
Sets the keyboard entry type to Ten-Key or Full Keyboard.
Full Keyboard Layout
(Default: English)
Sets the on-screen keyboard layout to English,
German, or French.
Screen Capture [POWER] Switch
(Default: OFF)
Assigns the Screen Capture function to
.
•
OFF:
does not act as the Screen Capture key.
• ON:
acts as the Screen Capture key.
L
When both “Screen Capture [POWER] Switch” and
“Screen OFF [POWER] Switch” are set to ON, pushing
displays the dialog to select “Screen OFF” or
“Screen Capture.”
Screen Capture File Type
(Default: PNG)
Sets the file format for the Screen Capture function to
PNG or BMP.
REF Adjust
Adjusts the internal reference frequency.
L
While synchronizing to the received GPS data, “REF
Adjust (Synchronizing to GPS)” is displayed, and you
cannot manually adjust the internal reference frequency.
To manually adjust, touch [Cancel Sync] to cancel the
GPS synchronization.
Содержание IC-905
Страница 1: ...BASIC MANUAL ALL MODE TRANSCEIVER 905...
