Icom IC-905, Основное руководство

Страница: 61 / 96

8-7
BASIC MANUAL
SET MODE
8
8
The assignable key functions for Front Key
[VOX/BK-IN]
Function Description
TRANSMIT Push to toggle between transmit and receive.
VOX/BK-IN*
Push to turn the VOX function in the Voice
operation modes and the Break-in function
in the CW mode ON or OFF.
P.AMP/ATT
In the 144, 430, or 1200 MHz band
• Push to turn ON or OFF, and select one
of two receive RF preamplifiers.
• Hold down for 1 second to turn the
Attenuator ON or OFF.
NOTCH*
Push to turn the Notch function ON or
OFF, and select the Notch function type.
NB* Push to turn the Noise Blanker ON or OFF.
NR*
Push to turn the Noise Reduction function
ON or OFF.
SPLIT
• Push to turn the Split function ON or OFF.
• Hold down for 1 second to turn ON the
Quick Split function.
A/B
• Push to select the VFO A or VFO B.
• Hold down for 1 second to set the
displayed VFO’s frequency to the VFO
that is not displayed.
VFO/MEMO
• Push to select the VFO mode and the
Memory mode.
• Hold down for 1 second to copy the
Memory channel contents to the VFO.
CD Push to open the received call history.
PRESET Push to open the PRESET screen.
Home CH
Push to directly select the Home Channel
that is set to the selected mode (VFO/
Memory) or DR screen.
L
While in the Call channel mode, or when no
Home CH is set, an error beep sounds.
Temporary
Skip
Push to set the frequency to be skipped
while scanning. The selected frequencies
are temporarily skipped for faster scanning.
Voice/Keyer/
RTTY Memory 1
In the SSB, AM, FM, DV, or ATV mode
• Push to transmit the voice audio
recorded on the SD card once.
• Hold down for 1 second to repeatedly
transmit the voice audio.
L
This key function can also be used on the DR
screen.
L
If the voice audio is not saved in the Voice TX
memory (T1 ~ T4), this function is disabled.
In the CW mode
• Push to transmit the Keyer memory
content once.
• Hold down for 1 second to repeatedly
transmit the memory content.
L
If the Keyer memory content (M1 ~ M4) is not
entered, this function is disabled.
In the RTTY mode
Push to transmit the RTTY memory
content once.
L
If the RTTY memory content (RT1 ~ RT4) is
not entered, this function is disabled.
Voice/Keyer/
RTTY Memory 2
Voice/Keyer/
RTTY Memory 3
Voice/Keyer/
RTTY Memory 4
[AUTOTUNE/RX>CS/AFC]
Function Description
AUTOTUNE/
RX>CS/AFC
In the CW mode
Push to automatically tune the operating
frequency to a close-by CW signal.
In the FM or DV mode
Push to turn the Auto Frequency Control
function ON or OFF.
In the DV or DD mode
Hold down for 1 second to display the RX
History list.
CD/RX>CS
• Push to open the received call history.
• In the DV or DD mode, hold down for 1
second to display the RX History list.
PRESET/
RX>CS
• Push to open the PRESET screen.
• In the DV or DD mode, hold down for 1
second to display the RX History list.
Home CH/
RX>CS
• Push to directly select the Home
Channel that is set to the selected
mode (VFO/Memory) or DR screen.
L
While in the Call channel mode, or when
no Home CH is set, an error beep sounds.
• In the DV or DD mode, hold down for 1
second to display the RX History list.
Temporary
Skip/RX>CS
• Push to set the frequency to be
skipped while scanning. The selected
frequencies are temporarily skipped for
faster scanning.
• In the DV or DD mode, hold down for 1
second to display the RX History list.
* Hold down for 1 second to open its function menu.