manualshive.com logo in svg

Icom IC-756PROIII, Инструкция по эксплуатации

Поделиться
Скачать
Icom IC-756PROIII Скачать руководство пользователя страница 49

44

4

RECEIVE AND TRANSMIT

4

■

Operating RTTY (FSK)

When using your RTTY terminal or TNC, consult the
manual that comes with the RTTY terminal or TNC.

q

Push a band key to select the desired band.

w

Push 

[CW/RTTY]

to select RTTY.

• After RTTY mode is selected, push 

[CW/RTTY]

for 1

sec. to toggle between RTTY and RTTY-R modes.

• “RTTY” or “RTTY-R” appears.

e

Push 

[(F-3)DECODE]

to display the decoder

screen.

• The IC-756PROIII has a Baudot decoder.

r

Rotate the tuning dial to simultaneously tune a de-
sired signal.

• The S-meter indicates received signal strength when

signal is received.

t

Push 

[TRANSMIT]

to transmit.

• The TX indicator lights red.

y

Type from the connected PC’s keyboard to enter
the contents that you want to transmit.

• The text color will be changed when transmitted.
• Press one of 

[F-1]

to 

[F-4]

to transmit the TX memory

contents.

u

Push 

[TRANSMIT]

to return to receive.

[CW/RTTY]

[AF]

Tuning dial

[TRANSMIT] [TX] indicator [RX] indicator Band keys

D

D

Convenient functions for receive

• Preamp 

(p. 57)

➥

Push 

[P.AMP]

several times to set the preamp

OFF, preamp 1 ON or preamp 2 ON.

• “P.AMP1” or “P.AMP2” appears when the preamp 1 or

preamp 2 is set to ON, respectively. (depending on
operating frequency band)

• Attenuator

(p. 57)

➥

Push 

[ATT]

several times to set the attenuator in

6 dB steps.

• “ATT” and attenuation level appear when the attenua-

tor is set to ON.

• Noise blanker

(p. 64)

➥

Push 

[NB]

switch to turn the noise blanker ON

and OFF.

• Noise blanker indicator (in 

[NB]

switch) lights when

the noise blanker is set to ON.

➥

Push 

[NB]

for 1 sec. to enter the noise blanker

level set mode, then rotate the tuning dial to ad-
just the threshold level.

• Twin PBT (passband tuning)

(p. 60)

➥

Rotate 

[TWIN PBT]

controls (inner/outer).

• Push 

[PBT CLR]

to clear the settings.

• Noise reduction

(p. 65)

➥

Push 

[NR]

switch to turn the noise reduction ON

and OFF.

• Rotate 

[NR]

control to adjust the noise reduction level.

• Noise reduction indicator (in 

[NR]

switch) lights when

the noise reduction is set to ON.

• AGC (auto gain control)

(p. 59)

➥

Push 

[AGC]

switch several times to select

AGC FAST, AGC MID or AGC SLOW.

➥

Push 

[AGC]

for 1 sec. to enter the AGC set

mode.

• Rotate the tuning dial to adjust the time constant.

•

1

⁄

4

function

(p. 27)

➥

Push 

[1/4]

to turn the 

1

⁄

4

function ON and OFF.

Содержание IC-756PROIII





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды