Icom IC-7300 HF Plus Скачать руководство пользователя

Страница: 126 / 174

SET MODE

12-11

Time Set

Dmte

(Default: 2000/01/01)

Sets the date (Year/Month/Day).

(The day of the week is automatically set.)

•

Range: Year 2000 ~ 2099, Month/Day 1-1 ~ 12-31

Time

(Default: 0:00)

Sets the current time.

(The time is displayed in the 24 hour format.)

SD Cmrd

Lomd Setting

Selects the saved data file to load.

See “Loading the saved data files onto an SD card”

(p. 8-6) for details.

Smve Setting

Saves the setting data onto an SD card.

See “Saving the setting data onto an SD card” (p. 8-4) for

details.

MENU

» SET >

Time Set

MENU

» SET >

SD Cmrd

UTC Onnset

(Default: ± 0:00)

Sets the UTC offset time.

•

Range: –14:00 to +14:00 (in 5 minute steps)

NOTE: The bmckup bmttery nor the internml clock

The IC-7300 has a rechargeable Lithium battery to backup

the internal clock. If you connect the transceiver to a

power source, the battery is charged and it keeps the

correct clock setting. However, if you do not connect the

transceiver to a power source for a long period of time, the

battery will discharge. In that case, the transceiver resets

the internal clock.

If you do not use the transceiver for a long period, we

recommend that you connect the transceiver to a power

source at least once a month. The charging period is two

days whether the transceiver’s power is ON or OFF.

Smve Form

(Default: Now Ver)

Selects the format to save the settings onto an SD

card.

Now Ver:

Saves the settings in the current

version format.

Old Ver (x.xx - x.xx): Saves the settings in older

version format indicated in the

parenthesis (x.xx = version).

SD Card (Continued)

NOTE:

•If you select “Old Ver (xxx - xxx),” a function that

is added when the transceiver’s firmware format is

updated will not be saved.

•

You cannot load a setting file that is saved in the

current version format to an earlier firmware version.

SD Cmrd Inno

Displays the SD card capacity and the time remaining

for voice recording.

See “Displaying the information” (p. 8-7) for details.

Screen Cmpture View

Displays the selected screen capture.

See “Screen Capture function” (p. 13-5) for details.

Firmwmre Updmte

Displays the Firmware Update mode.

See “Updating the firmware” (p. 15-5) for details.

Formmt

Formats the SD card.

If you use a brand new SD card, be sure to format it.

See “Formatting an SD card” (p. 8-3) for details.

Unmount

Unmounts the SD card.

Before you remove a card when the transceiver is ON,

be sure to electrically unmount it.

Otherwise the data may be corrupted or deleted.

See “Unmounting an SD card” (p. 8-3) for details.

Previous view

Содержание IC-7300 HF Plus















































































































































































Результаты поиска

Содержание IC-7300 HF Plus

Отзывы:

Похожие инструкции для IC-7300 HF Plus

Бренды по названию

Популярные бренды

Icom IC-7300 HF Plus, Полное руководство

Результаты поиска

Содержание IC-7300 HF Plus

Отзывы:

Похожие инструкции для IC-7300 HF Plus

Бренды по названию

Популярные бренды