4-4
ADJUSTMENT ITEM
TRANSCEIVER'S CONDITION
OPERATION
ADJUST
POINT
VALUE
ID ADJUSTMENT
1 • Display: "ID SET HF"
• Connect the 50
Ω
dummy load to
[ANT1].
–
Push [SET].
2 • Display: "HFID1V"
• Push [SET]. (Automatically starts
to transmit.)
Push [SET] again.
(A beep sounds, and
then beeps sound 3
sec. later. Then next
adjustment item is
selected.)
3 • Display: "HFID2V"
• Transmit continues
–
Push [SET].
(A beep sounds,
transmission stops,
and then beeps sound
3 sec. later. Then next
adjustment item is
selected.)
4 • Display: "DID SET"
Push [SET].
(Then the next
adjustment item
is selected, and
automatically starts to
transmit.)
5 • Display: "DIDV"
Push [SET].
(A beep sounds,
transmission stops,
and then beeps sound
3 sec. later. Then next
adjustment item is
selected.)
6 • Display: "ID SET V/UHF"
Push [SET].
(Then the next
adjustment item
is selected, and
automatically starts to
transmit.)
7 • Display: "VUIDV"
Push [SET].
(A beep sounds,
transmission stops,
and then beeps sound
3 sec. later.
ID-APC OPERATING
POINT ADJUSTMENT
1 • Display: "ID-APC HF"
–
Push [MIC/RF PWR] to return to the main adjustment menu.
VD ADJUSTMENT
Push [NR] to enter the REF adjustment menu.
VD-APC ADJUSTMENT
1
–
• Connect the 50
Ω
dummy load to
[ANT1].
–
Push [NB].
2 • Display: "VD-APC"
[MAIN DIAL]
Push [SET].
3 • Display: "VD-APC START 11.8V"
11.9 V
Push [SET].
4 • Display: "VD-APC 75% 11.0V"
11.1 V
Push [SET].
The REF adjustment menu is displayed.
Push [MIC/RF PWR] to return to the main adjustment menu.
4-4 ID ADJUSTMENTS
(continued)
1) Set or modify the adjustment value as specifi ed by rotating [MAIN DIAL].
2) Push [SET] to store the value.