17
Section
8
SPECIFICATIONS
D
General
• Frequency coverage:
CB 476.4250–477.4125 MHz
RX 450.000–520.000 MHz (RX only)
• Mode:
CB channel
8K50F3E
RX channel
8K50F3E/16K0F3E
• Channel spacing:
CB channel
12.5 kHz
RX channel
12.5/25 kHz
• Current drain (at 7.5 V):
TX (at 5 W)
approx. 1.7 A
Max. audio
approx. 300 mA
• Power supply requirement: 7.5 V DC nominal*
(Negative ground)
*Specified Icom’s battery pack
only
• Frequency stability:
±2.5 ppm (–30°C to + 60°C)
• Antenna impedance:
50
Ω
nominal
• Dimensions:
W 52.2
×
H 111.8
×
D 30.3 mm
(Projections not included)
• Weight:
Approx. 270 g (with BP-280)
D
Transmitter
• Output power:
5 W/1 W (selectable)
• Modulation system:
Variable reactance
frequency modulation
• Max. frequency deviation:
±2.5 kHz
• Spurious emissions:
70 dB (min)
D
Receiver
• Receive system:
Double conversion
superheterodyne
• Sensitivity (12 dB SINAD):
0.25 µV (typical)
• Squelch sensitivity:
0.25 µV (typical)
• Intermodulation rejection ratio: 73 dB (typical)
• Spurious response rejection ratio: 70 dB (min)
• Audio output power:
0.8 W (typical) at 5%
distortion with 12
Ω
load
(INT)
0.4 W (typical) at 5%
distortion with 8
Ω
load
(EXT)
All stated specifications are subject to change without
notice or obligation.
