10
4
SCAN OPERATION
■
Scan resume
condition
The scan resume condition can be selected as a pause or
timer scan.
q
Push [LOW] for 2 sec. to enter
set mode.
w
Push [LOW] several times
until “SC” appears.
e
Push [
Y
] or [
Z
] to select the
scan resume timer.
- “t-05”
: Scan pauses 5 sec.
while receiving a signal.
- “t-10”
: Scan pauses 10 sec.
while receiving a signal.
- “t-15”
: Scan pauses 15 sec.
while receiving a signal.
- “P-05” : Scan pauses until the
signal disappears and
then resumes 5 sec.
thereafter.
r
Push [LOW] for 2 sec. to exit
set mode.
[
Pauses until the signal
disappears.
10 sec. timer for resume
condition.
15 sec. timer for resume
condition.
5 sec. timer for resume
condition.
